All Electronics Corp. Catalog No. PMP – MONO PLASTIC 3. 5 MM PLUG. The connector will need to be soldered to the PowerHorn’s cable. You can get this connector at Radio Shack when you get the Mini Amp here abut at a higher price. Note: Above are the places where the hardware is still avaliable.

There are many other places where the items may be purchases. Also, the 1GB Secure Digital cards now cost about as much as the 512MB SD cards were priced a few months ago and the 1GB SD card has twice the storage size. A Better Weasel Ball Decoy by Dick Wendell This is an excellent improvement on the Weasel Ball Decoy.

See and Listen to the Struggling Varmint Video Download. Al, you are completely free to use my pictures and technique for building this for your website. Your generosity is extended back to you my friend. Note: The reason the action is random is that the tail hits either the ground or the lower bar.

It really makes an erratic action. Equipment:Metal cutting saw Welder (I use a 110v wire feed welder) 1/4″ coarse thread die for cutting threads on rod Tape MeasureMaterials:Weasel Ball (cat toy) 1/4″ cold rolled round rod 1/4″ coupling nut Grinder for putting point on the rod and cleaning up cuts Camo paintGoal:To make a predator decoy with erratic movements that is able to be displayed above tall grass and snow at a low cost. Process: Ball Preparation:1 – The Weasel Ball is easily found online for under $3. 00. In fact the shipping is more than the item itself. Unscrew the ball and paint the half with the tail in an appropriate color for your area. I used a dead grass color. Leave the tail as installed. 2 – Get some white fake fur and sew a small tuft on the end of the tail to add as an attractor. Stand Fabrication:1 – The top portion of the stand is made by taking a 12″ piece of 1/4″ round rod and bending a 90 degree bend about 2 inches from one end. Heating with a torch will make the bend much sharper. Placing the heated end of rod in a vice makes it easier and safer to bend. 2 – Take a 2 inch piece of the 1/4″ round rod and weld it approximately 1 3/8″ directly below the 90 degree bend. This location is best determined by holding the two pieces in place on the ball and marking the correct location. Once welded in place, if it is loose the two forks can be put in a vice and gently squeezed together until the forks slide firmly into place. It needs to be easy to remove so you replace the battery as needed. 3 – Take a 4 1/4 inch piece of the 1/4″ rod and weld to the stand approximately 5 inches below the bottom of the forks.

This piece is needed to give the decoy an erratic movement. Without this piece the tail will simply swing in a big circle. With this piece the tail will swing, then make some jumping/jerking movements and the sequence is never the same. 4 – Using the 1/4 inch thread die make threads on the lower end of the rod.

You can’t communicate with anything else but if you just need to chat with friends or family it might be a simple way to go. READ MOREFor more of our top hiking & backpacking gear recommendations, check out these popular articles:ElectronicsAbout The AuthorHiker. Trail runner. Mountain biker.

CrossFitter. Always up for an adventure or just relaxing and reading about them. Has to see what’s around the next bend. Related PostsHow To Fit A Backpack For HikingBest Hiking Watches of 2021How To Pack A Backpack For HikingBram Reusen2 ResponsesChristina November 14, 2016 This is an excellent list of key features to identify to ensure the best buy.

They’ve been around since the 1890s and are still just as classy and functional as ever. Patagonia Altvia Trail Pants ($119)Materials: 86% polyester, 14% spandex Weight: 11. 1 oz. Belt included: No What we like: Very stretchy build with zippered storage. What we don’t: Shorter inseam can impact fit.

Before you getting ready to set up coyote decoy you should spend some time to make sure there are coyotes in your location. There are definitely coyotes during deer hunting season. You probably may notice any track or scat, some signs of the recent kill.

If there is nothing like that then you have to look for a coyote around the fields or bottom river. You may also find predator where rodents are. Visibility. Try to set up decoy in a place where coyote is able to see it clearly.

Do not forget about that your hunting gear has to eliminate the shine so you can stay unnoticeable for a predator. Scents and wind. Before you set up the decoy check the direction of the wind. Other officers, however, testified in support of the legislation.

There also could be a financial impact to the state. Bill eliminates millionsUsually handgun licenses fees help go toward training for local law enforcement officers. According to a fiscal analysis of the bill, police departments could lose a collective $5. 3 million in fiscal year 2023 if the bill passes.

That budget bill passed the House on Monday evening by a 65-30 vote.

House Republicans put $3. 5 million for local police department training into the $36. 3 billion two-year state budget proposal to help offset the lost revenue. That budget bill passed the House on Monday evening by a 65-30 vote. Here’s how out-of-state licensing would workHoosiers would still be able to get a reciprocity license to carry for other states.

Five-year licenses would be free, while lifetime permits would cost $75. That money would help make up for the loss of in-state permits as well, though it’s unclear how much money that provision would generate. Since at least 2016, advocates have pushed for so-called “constitutional carry” in Indiana, but have never been able to get the bill across the finish line.

Lawmakers, however, have successfully already made it easier to get a permit, nixing the costs associated with short-term permits. Holcomb had signed that 2019 bill in front of the National Rifle Association convention. Both the budget and House Bill now move to the Senate for consideration.

Without a permit, handguns must be unloaded, not readily accessible and secured in a case.

Can I Carry a Gun in My Car in Indiana? Yes, with a valid concealed carry license. Without a permit, handguns must be unloaded, not readily accessible and secured in a case. Can an 18-Year-Old Carry a Handgun in Indiana? Yes, 18-year-olds can open carry and concealed carry in Indiana with a valid license to carry.

Can I Get a Gun Permit With a Misdemeanor in Indiana? The requirements for an Indiana License to Carry a Handgun (LCH) include that an applicant is a “proper person. ” Depending on the nature of the misdemeanor conviction and how long ago you were convicted, you may not be eligible for an LCH.

For example, convictions for crimes for which the person could have been sentenced for more than one year and for any crime involving an inability to safely handle a handgun would disqualify an applicant. Does Indiana Have a Lifetime Gun Permit? Yes, As of July 1, 2020, the fee for a lifetime license will be $50 for anyone who does not currently possess a valid Indiana handgun license, and $40 for anyone who currently possesses a valid Indiana handgun license.

Vertx Fanton LT PantsTough but lightweight, the Vertx Fanton LT pants are a match for most of the other clothing items in your closet. There are several different colors available and the modern cut ensures the pants easily conform to your body shape. The cargo pockets are flatter than other pairs of tactical pants, which helps turn this into everyday wear.